Showing 157–168 of 250 results
-
RE-15
• Hollow shaft Ø: max. 12 mm • Outer Ø: 36.3 mm • Length: 16 mm -
RE-21
• Hollow shaft Ø: max. 17 mm • Outer Ø: 52.4 mm • Length: 26 mm -
Reflectors
• Passive optical device for photoelectric sensors • Reflects light beam back to sensor for detection • Requires retro-reflective sensor mode • No power supply needed • Commonly used for object detection, positioning, and safety barriersReflectors
• Passive optical device for photoelectric sensors
• Reflects light beam back to sensor for detection
• Requires retro-reflective sensor mode
• No power supply needed
• Commonly used for object detection, positioning, and safety barriers -
RST Series
• Advanced industrial aesthetics design • Soft light for eye protection • Pre-assembled for convenience • Accurate and user-friendly • High cost-performance • Additional Transparent Housing • Dual Mounting Options • Adjustable buzzer • 360° Strong Visibility • 2-5 Tiers Plus Buzzer as OptionRST Series
• Advanced industrial aesthetics design
• Soft light for eye protection
• Pre-assembled for convenience
• Accurate and user-friendly
• High cost-performance
• Additional Transparent Housing
• Dual Mounting Options
• Adjustable buzzer
• 360° Strong Visibility
• 2-5 Tiers Plus Buzzer as Option -
S50/1
• analog position indicator • Measured value acquisition based on the gravity principle • High stability thanks to doubly supported pointer shaft • Very robust, glass-fiber reinforced plastic housing • Wide range of gear ratios • Special scales, also for small numbers of pieces • Dustproof, oil-filled or waterproof versionsS50/1
• analog position indicator
• Measured value acquisition based on the gravity principle
• High stability thanks to doubly supported pointer shaft
• Very robust, glass-fiber reinforced plastic housing
• Wide range of gear ratios
• Special scales, also for small numbers of pieces
• Dustproof, oil-filled or waterproof versions -
S70/1
• analog position indicator • Measured value acquisition based on the gravity principle • High stability thanks to doubly supported pointer shaft • Very robust, glass-fiber reinforced plastic housing • Wide range of gear ratios • Special scales, also for small numbers of pieces • Dustproof, oil-filled or waterproof versionsS70/1
• analog position indicator
• Measured value acquisition based on the gravity principle
• High stability thanks to doubly supported pointer shaft
• Very robust, glass-fiber reinforced plastic housing
• Wide range of gear ratios
• Special scales, also for small numbers of pieces
• Dustproof, oil-filled or waterproof versions -
S80/1
• analog position indicator • Measured value acquisition based on the gravity principle • High stability thanks to doubly supported pointer shaft • Very robust, glass-fiber reinforced plastic housing • Wide range of gear ratios • Special scales, also for small numbers of pieces • Dustproof, oil-filled or waterproof versionsS80/1
• analog position indicator
• Measured value acquisition based on the gravity principle
• High stability thanks to doubly supported pointer shaft
• Very robust, glass-fiber reinforced plastic housing
• Wide range of gear ratios
• Special scales, also for small numbers of pieces
• Dustproof, oil-filled or waterproof versions -
SA-80
• Easy installation and excellent environmental resistance • High-speed response time of 100ms/90% • IO-Link network supported (SA-80T-4IO) • Wide field of view of φ80mm at 500mm • M18 cylindrical housing with IP67 rating against dust and water • Heat resistance up to 70°C, 158 °F • SUS housing and silicone lens for superb resistance against noise to perform accurate and stable measurementSA-80
• Easy installation and excellent environmental resistance
• High-speed response time of 100ms/90%
• IO-Link network supported (SA-80T-4IO)
• Wide field of view of φ80mm at 500mm
• M18 cylindrical housing with IP67 rating against dust and water
• Heat resistance up to 70°C, 158 °F
• SUS housing and silicone lens for superb resistance against noise to perform accurate and stable measurement -
SA030
• Outer diameter: max. 29 mm • Special design possible • High frequency coupling possible • Fieldbusses • Fast Ethernet (certified to 100-BaseT CAT5e & Cat6)SA030
• Outer diameter: max. 29 mm
• Special design possible
• High frequency coupling possible
• Fieldbusses
• Fast Ethernet (certified to 100-BaseT CAT5e & Cat6) -
SC012
• Outer diameter: max. 12 mm • Special design possible • Fieldbusses • Fast Ethernet (certified to 100-BaseT Cat.5e & Cat.6) • Gigabit Ethernet (certified to 1000-BaseT CAT5e) • HD-SDI, based on the standard SMPTE 292M • 3G-SDI, based on the standard SMPTE 424MSC012
• Outer diameter: max. 12 mm
• Special design possible
• Fieldbusses
• Fast Ethernet (certified to 100-BaseT Cat.5e & Cat.6)
• Gigabit Ethernet (certified to 1000-BaseT CAT5e)
• HD-SDI, based on the standard SMPTE 292M
• 3G-SDI, based on the standard SMPTE 424M -
SC020
• Outer diameter: max. 20 mm / 22 mm • Inner diameter: max. 3 mm • Fieldbusses • 12G-SDI partly based on SMPTE ST 2082-10 • Fast Ethernet (certified to 100-BaseT Cat.5e & Cat.6) • Gigabit Ethernet (certified to 1000-BaseT CAT5e) • 10G Ethernet (certified to 10G-BaseT CAT5e)SC020
• Outer diameter: max. 20 mm / 22 mm
• Inner diameter: max. 3 mm
• Fieldbusses
• 12G-SDI partly based on SMPTE ST 2082-10
• Fast Ethernet (certified to 100-BaseT Cat.5e & Cat.6)
• Gigabit Ethernet (certified to 1000-BaseT CAT5e)
• 10G Ethernet (certified to 10G-BaseT CAT5e) -
SC020-COAX
• COAXIAL SLIP RING FOR HD-VIDEO SIGNALS • Outer diameter: max. 20 mm • HD-SDI based on the standard SMPTE 292M • 3G SDI based on the standard SMPTE 424M • 6G-SDI partly based on SMPTE ST 2081SC020-COAX
• COAXIAL SLIP RING FOR HD-VIDEO SIGNALS
• Outer diameter: max. 20 mm
• HD-SDI based on the standard SMPTE 292M
• 3G SDI based on the standard SMPTE 424M
• 6G-SDI partly based on SMPTE ST 2081
